Gree GMV-80WL/C-T

GREE DC Inverter Multi VRF System II Service Manual
131
Removal operation of compressor
Remark: Before removing the compressor, please make sure that there’s no refrigerant inside the pipeline and the power
is disconnected.
Process Photo
Operation
Instruction
4. Remove the
compressor
from the chassis
● Take out the
compressor and
replace it
Note: When
replacing the
compressor, do not
damage nearby
pipelines and other
parts
5. Fix the new
compressor at
the chassis

After replacing the
compresor,
fix the
nuts at the bottom
of compressor