Gree GMV-ND22G/A3A-T - Preparations for Installation; Location for Installation

Multi Variable Air Conditioners Wall Mounted Type Indoor Unit
4
Note
：
The appearances will be different by the different models of air conditioners.
No.
Part Name
No.
Part Name
①
Surface panel
④
Guide louver
②
Filter
⑤
Drain pipe
③
Wiring cover
—
—
2.2 Rated Operating Condition
Item
Indoor Condition
Outdoor Condition
DBTemperature(°C)
WBTemperature(°C)
DBTemperature(°C)
WBTemperature(°C)
Rated Cooling
27
19
35
24
Rated Heating
20
15
7
6
3 Preparations for Installation
3.1 Location for Installation_
(1) The appliance shall not be installed in the laundry.
(2) The indoor unit should be installed at 2.5m or higher above the floor.
(3) The top holder must be strong enough to support unit’s weight.
(4) Drain pipe can drain water out easily.
(5) There is no obstacle at inlet or outlet. Please ensure good air circulation.
(6) Keep the unit away from heating source, inflammable gas or smoke.
3.2 Schematic diagram of installation spaces
Unit: mm
Fig 3.2.1
Notes:
① The unit shall be installed by the professional personnel according to this installation
instruction to ensure proper use.
② Please contact the local Gree appointed service center before installation. Any
malfunctioncaused by the unit that is not installed by the Gree appointed service center