To Next PageTo Next PageWhat to do if there is a wrong number of indoor unit for one-to-more indoor unit in Gree GMV-ND36T/B-T Air Conditioner?
If you're using a one-to-more indoor unit system with your Gree Air Conditioner and suspect an issue with the number of units, verify the number of connected indoor units.
What to do if my Gree Air Conditioner stops after running for a while?
If your Gree Air Conditioner stops running after a while, it could be due to the inlet or outlet of the outdoor (ODU) or indoor unit (IDU) being blocked by an obstacle. It might also indicate an abnormal control loop. Another possibility is that you have set the unit to cooling mode when the outdoor ambient temperature is higher than 43°C.
General| Brand | Gree |
|---|---|
| Model | GMV-ND36T/B-T |
| Category | Air Conditioner |
| Language | English |
Information for users regarding safe operation and supervision, especially for children and persons with reduced capabilities.
Guidelines for environmentally responsible disposal of the product, preventing harm from waste.
Identifies and illustrates the main parts of the indoor unit with labels and a diagram.
Specifies the standard operating conditions for cooling and heating performance based on temperatures.
Lists available functions and their compatibility with different types of controllers.
Lists and describes the standard accessories included in the package for installation.
Provides criteria and considerations for choosing the optimal location to install the unit.
Details on selecting the appropriate communication wire for connecting indoor units to wired controllers.
Guidelines for choosing communication wire for inter-unit connections between indoor and outdoor units.
Specifies requirements for power cords, circuit breakers, and air switch capacity.
Provides detailed dimensions and suspension bolt positions for the indoor unit installation.
Step-by-step guide for securely suspending the indoor unit during the installation process.
Important notices and requirements to ensure proper installation of the drainage pipe.
Detailed steps for correctly installing the drainage pipe to prevent leaks and blockages.
Procedure for testing the drainage system to ensure proper water flow and detect leaks.
Key considerations and potential problems associated with decorative panel installation.
Step-by-step guide for attaching the decorative panel to the indoor unit body.
Procedures for making electrical connections to terminal boards using various wire types.
Steps for correctly connecting the power supply cord to the unit's terminals.
Guide for connecting communication wires between the indoor and outdoor units.
Instructions for connecting communication wires to the wired controller.
Details on setting up the network for wired controllers and multiple indoor units.
Instructions on how to properly clean the air filter for optimal performance.
Checks to perform before the start of the cooling or heating season.
Tasks to complete after the unit has been used for a season.
