31
© Copyright, GREE Canada, 2021 © Copyright, GREE Canada, 2021
Install heat discharge pipe
1. Rotate joint A clockwise into the heat discharge pipe.
Join A
Join A
Clasp
Groove
The side with "TOP" is upwards
Heat discharge pipe
Clockwise
Heat discharge pipe
2. Install another side of heat discharge pipe clockwise into protective grille sub-assy.
3. Insert joint A of heat
discharge pipe (the
side with "TOP" is
upwards) into the
groove until you
hear a sound.
INSTALLATION OF HEAT DISCHARGE PIPE
To Next Page
Loading...
