Gree GRS-1.5/TD200ANbA-K

Other manuals for Gree GRS-1.5/TD200ANbA-K

Service Manual81 pages

Questions and Answers

J
John McknightAug 9, 2025
What to do if Gree GRS-1.5/TD200ANbA-K shows E1 High Pressure Protection?
- A
  Amanda EdwardsAug 9, 2025
  The E1 error code on your Gree Water Heater indicates high pressure protection. This can be due to several reasons: a poor connection of the water tank temperature sensor, a loose pressure switch cable, a faulty pressure switch, or a mainboard fault. Try these solutions: Ensure the thermo-bulb is properly installed, re-connect the cable for the pressure switch, replace the pressure switch, or replace the mainboard.
J
jasonreevesAug 16, 2025
What does E6 Communication Fault mean on a Gree GRS-1.5/TD200ANbA-K?
- M
  meyerjamesAug 16, 2025
  An E6 Communication Fault on your Gree Water Heater suggests a problem with communication. This could be due to an exception or incorrect connection of the communication cable, a display fault, or a mainboard fault. Try these solutions: Re-connect the communication cable, replace the communication cable, or replace the wired controller.
D
Denise WoodsAug 25, 2025
What to do if Gree GRS-1.5/TD200ANbA-K displays F3, F4, F6, Fd, FE, FL Temperature sensor Fault?
- R
  Robert KennedyAug 25, 2025
  If your Gree Water Heater is showing an F3, F4, F6, Fd, FE, or FL error, it indicates a temperature sensor fault. This could be due to an incorrect connection of the temperature sensor, a faulty temperature sensor, or a mainboard fault. Try these solutions: Re-connect the thermo-bulb, replace the thermo-bulb, or replace the mainboard.
C
Christine BanksSep 1, 2025
Why is my Gree GRS-1.5/TD200ANbA-K showing E4 Air Exhaust Protection?
- A
  Ashley OliverSep 1, 2025
  The E4 error code on your Gree Water Heater indicates air exhaust protection. This may be due to an air exhaust temperature sensor fault, refrigerant leakage, or insufficient refrigerant. To resolve this, try the following: Replace the thermo-bulb, repair welding and perfuse refrigerant again, or add refrigerant to the unit.