Gree GRS-1.5/TD200ANbA-K - Installation Space and Diagrams

Air Source Heat Pump Water Heater
13
2
Due to installation location limit, if this model cannot meet installation
demand, please choose other water heaters of Gree models.
4.2 Installation Space Requirement and Installation Diagram
4.2.1 Main Size
A
B
D
C
E
Condensate Outlet
Hot Water Outlet
Temperature Sensor 1
Impressed Current Anode
Temperature Sensor 2
Cold Water Inlet
Figure 4-1 Unit struture size chart
Model
Parameter
GRS-1.5/TD150ANbA-K
GRS-1.5/TD200ANbA-K
A(mm)
Φ540
Φ540
B(mm)
1760
2030
C(mm)
1206
1476
D(mm)
186
186
E(mm)
1032
1302
4.2.2 Installation requirement
(1) The unit shall be installed upright on the strong enough balcony or floor.
Do not point the air outlet of water heater at the upwind direction.
(2) The unit shall be installed in places with the temperature of above 0°C.
Hot water outlet shall not be too far from hot water use site. Arrange the