Heat Pump Pool Heater
4
(24) Improper operation may get the unit broken, hit by electric shock or cause fire.
(25) Do not make the unit wet or electric shock may be lead, ensure that the unit will not be
cleaned by water rinsing under any circumstance.
(26)
Once the unit is started, it must be operated for at least 6 minutes before shutdown, otherwise
the service life of the unit will be affected. Do not manually start and stop the unit frequently.
(27) When using this product in winter (the temperature may be lower than 0
℃
that the unit is always powered on; If it is not used in winter or the unit fails to use due to
failure, please be sure to drain the water in the unit and pipeline immediately after power
failure to prevent the system from freezing and cracking.
(28) Keep ventilation openings clear of obstruction.
(29) The inlet and outlet pipes connected to the unit must be made of insulation, and the length
must be ≥1.5m.
(30) Protection devices ,piping ,and fittings shall be protected as far as possible against adverse
environmental effects ,for example ,the danger of water collecting and freezing in relief pipes
or the accumulation of dirt and debris .
(31) Steel pipes and components shall be protected against corrosion with a rustproof coating
before applying any insulation.
(32) Flexible pipe elements shall be protected against mechanical damage excessive stress by
torsion ,or other forces ,and that they should be checked for mechanical damage annually.
(33) Precautions shall be taken to avoid excessive vibration or pulsation.
(34) This unit is designed for outdoor installation. It is NOT certified for indoor installation. DO NOT
install it in an enclosed area such as a shed or garage, or under a porch or deck.
This marking indicates that this product should not be disposed with other ho
wastes throughout the U.S
. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources. To return your used device, please u
se the
return and collection systems or contact the retailer where the product was purchased.
They can take this product for environmental safe recycling.
(1) Do not put a finger or other objects into the air inlet or air return grill.
(2) Please adopt safety protection measures before touching the refrigerant pipe, otherwise your
hands may be hurt.
(3) Please arrange the drain pipe according to the instruction manual.
(4) Never stop the unit by directly cutting off the power.
(5) Never install the unit in the following places:
1)
Places with oil smoke or volatile liquid: plastic parts may deteriorate and fall off or even
cause water leakage.
2)
Places with corrosive gas: copper pipe or the welding parts may be corroded and cause
refrigerant leakage.
(6) Adopt proper measures to protect the outdoor unit from small animals because they may
damage the electric components and cause malfunction of the unit.
(7) Do not replace accessories on your own. It is recommended to conduct regular inspection
and maintenance every year. Please contact the local after-sales maintenance personnel,
who will provide you with paid services.
To Next Page
Loading...