Gree GRS-CQ4.0Pd/NhG3-E

Air-to-water Heat Pump
17
MONOBLOC
TYPE
6.2 Installation of monobloc unit
6.2.1 Selection of installation location of monobloc unit
(1) Monobloc unit must be installed on a rm and solid support.
(2) Avoid placing the monobloc unit under window or between two constructions, hence to prevent normal
operating noise from entering the room.
(3) Air ow at inlet and outlet shall not be blocked.
(4) Install at a well-ventilated place, so that the machine can absorb and discharge su󰀩cient air.
(5) Do not install at a place where ammable or explosive goods exist or a place subject to severe dust, salty
fog and polluted air.
6.2.2 Outline dimension of monobloc unit
(1) For models below
GRS-CQ4.0Pd/NhG3-E GRS-CQ6.0Pd/NhG3-E GRS-CQ4.0Pd/NhG4-E GRS-CQ6.0Pd/NhG4-E
1150
415
1063
302
365
(2) For models below
GRS-CQ8.0Pd/NhG3-E, GRS-CQ10Pd/NhG3-E GRS-CQ12Pd/NhG3-E GRS-CQ14Pd/NhG3-E
GRS-CQ16Pd/NhG3-E GRS-CQ8.0Pd/NhG3-M GRS-CQ10Pd/NhG3-M GRS-CQ12Pd/NhG3-M
GRS-CQ14Pd/NhG3-M GRS-CQ16Pd/NhG3-M GRS-CQ8.0Pd/NhG4-E GRS-CQ10Pd/NhG4-E
GRS-CQ12Pd/NhG4-E GRS-CQ14Pd/NhG4-E GRS-CQ16Pd/NhG4-E GRS-CQ8.0Pd/NhG4-M
GRS-CQ10Pd/NhG4-M GRS-CQ12Pd/NhG4-M GRS-CQ14Pd/NhG4-M GRS-CQ16Pd/NhG4-M