Gree GUD24W2/D-D(U) - Page 110

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
107
Disassembly and Assembly of the Electric Box
Step Picture Work Instruction
3. Remove the electric box.
 Disconnect the power cord and control
line from the wiring terminals, and
then draw them out.
 Loosen screws around the electric box
with a screwdriver.
 Remove the electric box from the unit.
4. Remove the electric
element.
 Disconnect the electric element from
the wiring terminal.
 Loosen screws around the electric
element with a screwdriver.
 Remove the electric element from the
electric box.
5. Mount the new electric
element.
 Place the electric element at the
proper position.
 Tighten the screws around the electric
element with a screwdriver.
 Wire the electric element to the wiring
terminal.