Gree GUD24W2/D-D(U) - Page 111

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
108
Disassembly and Assembly of the Electric Box
Step Picture Work Instruction
6. Reinstall the electric box.
 Place the electric box at the proper
position.
 Tighten screws around the electric box
with a screwdriver.
 Connect the power cord and control
line properly.
 Reassemble the unit as before.
Disassembly and Assembly of the Fan Motor
Step Picture Work Instruction
1. Remove the upper panel.
 Loosen screws round the upper panel
with a screwdriver.
 Remove the upper panel from unit.
2. Remove the fan.
 Disconnect the wires of the fan from
the wiring terminal and draw them out.
 Loosen screws located at the front of
the fan with a screwdriver.
 Remove the fan from the unit.