Gree GUD24W2/D-D(U) - Page 112

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
109
Disassembly and Assembly of the Fan Motor
Step Picture Work Instruction
3. Remove the motor.
 Loosen screws fixing the motor and
fan blades.
 Loosen screw bolts fixing the bracket.
 Remove the motor rightward from the
fan.
4. Reinstall the fan.
 Place the motor at the proper position.
 Tighten screws fixing the motor and
fan blades.
 Tighten screw bolts fixing the motor
bracket.
 After the installation, reassemble the
unit as before.
Disassembly and Assembly of the Evaporator and Drain Pan
Step Picture Work instruction
1. Remove the upper
panel.
 Loosen screws round the upper panel
with a screwdriver.
 Remove the upper panel from unit.