Gree GUD24W2/D-D(U) - Page 113

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL
110
Disassembly and Assembly of the Evaporator and Drain Pan
Step
Picture
Work instruction
2. Remove the lower panel
(1) and panel (2).
 Loosen screws round the lower panel
with a screwdriver.
 Remove the lower panel from unit.
3. Remove the enhanced
frame if applicable.
 Remove the screws from enhanced
frame.
 Disassemble the enhanced frame
from the unit.
4. Remove the mounting
plate of the drain pan.
 Loosen screws at both side of the
mounting plate with a screwdriver.
 Remove the mounting plate from the
unit.