Gree GUD24W2/D-D(U)

To Next Page

To Previous Page

GREE DC INVERTER HEAT PUMP CONDENSING UNIT SERVICE MANUAL

Model:GUD24W2/D-D(U), GUD30W2/D-D(U), GUD36W2/D-D(U)

Removal of Fan and Motor

NOTE: Before removing the fan, make sure power is cut off.

Step Picture Work Instruction

1. Remove the grill.

 Use a screwdriver to

unscrew the two screws

on the upper left and

lower right corners.

2. Remove the fan.

 Use a wrench to remove

the specialized nut and

gasket of the fan.

NOTE: Please keep the

nut and gasket safe after

removing them from the

fan.

3. Remove motor.

 Use a screwdriver to

unscrew the bolt of motor.

NOTE: Motor wire should

be first removed from the

electric box.

Gree GUD24W2/D-D(U) - Page 95