Gree GUD85W/NhA-T - Page 111

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
108
Removal of front panel
Note: Before removing the front panel, make sure power is cut off.
Step Picture Work instruction
8. Install the grill.
 Attach the grill back in place
and tighten up the screws.
9. Install the front side plate.
 Tighten up the screws
around the front side plate.
10. Install the upper cover plate.
 Tighten up the screws
around the upper cover
plate.
Model: GUD35W/NhA-T, GUD50W/NhA-T, GUD71W/NhA-T, GUD85W/NhA-T
Removal of compressor
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
Step Picture Work instruction
1. Remove wires.
 Loosen the securing screws
of the wires with a
screwdriver.
 Remove the wires.
Note: When removing the
wires, mark the wire
terminals corresponding to
their color so as to avoid
misconnection.