Gree GWH09MB-K3DNA2H/I(DRED) - Bind Up Pipe; Hang the Indoor Unit

27
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
Installation of indoor unit
Note:
● All wires of indoor unit and outdoor unit should be connected by a professional.
● If the length of power connection wire is insufcient, please contact the supplier
for a new one. Avoid extending the wire by yourself.
● For the air conditioner with plug, the plug should be reachable after nishing
installation.
● For the air conditioner without plug, an circuit break must be installed in the line.
The circuit break should be all-pole parting and the contact parting distance
should be more than 3mm.
3. Remove the wire clip; connect the power connection cord to the wiring terminal
according to the color; tighten the screws and then x the power connection cord
with wire clip.
yellow-
green
2 3N(1)
blue black brown
Outdoor unit connection
power connection
cord
cable-cross
hole
2. Make the power connection cord go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.