Why does my Gree Heat Pump have compressor overload protection?
Compressor overload protection in your Gree Heat Pump can be triggered by a few reasons: low refrigerant charge, a blocked capillary, or a failure in the compressor motor. It's recommended to inspect the refrigerant charge, check for any blockages in the capillary, and assess the condition of the compressor motor.
What causes IPM module protection in Gree GWH12KF-D3DNB1C?
The IPM Module protection in your Gree Heat Pump activates if the IPM Module temperature is too high, due to high ambient temperature, low voltage, or bad connections. Ensure the IPM Module is operating within proper temperature limits, and assess the ambient conditions and connections.
What to do if Gree Heat Pump has a 4-way valve malfunction?
If your Gree Heat Pump is experiencing a 4-way valve malfunction, it could be due to a bad connection, solenoid failure, or a malfunction within the valve itself. You should evaluate the connection, test the solenoid, and check for any valve malfunctions.
Why does Gree Heat Pump show compressor synchronism error?
A compressor synchronism error in your Gree Heat Pump could be due to high pressure, low voltage, or bad connections. Check the system's pressure levels, ensure the voltage is adequate, and inspect the connections.
How to fix Gree GWH12KF-D3DNB1C indoor air temperature thermistor issues?
To fix indoor air temperature thermistor issues in your Gree Heat Pump, inspect the connection and functionality of the Indoor Air Sensor. The problem may be a bad connection, or the indoor air sensor may have failed.
What causes Gree Heat Pump indoor coil temperature thermistor problems?
Indoor coil temperature thermistor problems in your Gree Heat Pump can be caused by a bad connection or failure of the indoor coil sensor. Examine the connection and test the Indoor Coil Sensor to see if it has failed.
How to troubleshoot Gree Heat Pump outdoor air temperature thermistor?
To troubleshoot the outdoor air temperature thermistor in your Gree Heat Pump, check the connection and assess the Outdoor Ambient Sensor. The issue may stem from a bad connection or failure of the outdoor ambient sensor.
What to do if Gree GWH12KF-D3DNB1C has outdoor coil temperature thermistor issues?
If your Gree Heat Pump is having outdoor coil temperature thermistor issues, look into the connection and evaluate the Outdoor Coil Sensor. A bad connection or failure of the outdoor coil sensor could be the cause.
What causes high current protection in Gree GWH12KF-D3DNB1C Heat Pump?
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Power Input (Heating) | 1.05 kW |
| Operating Temperature Range (Cooling) | 43 °C |
| Operating Temperature Range (Heating) | -15°C to 24°C |
To Next Page
