To Next PageTo Next PageWhy is my Gree GWH12MB-D3DNA3D indoor unit emitting noise?
If you hear noise from the indoor unit of your Gree Air Conditioner, it may be due to the sound of the fan or compressor relay switching on or off. It can also occur when defrosting starts or stops, which is caused by the refrigerant flowing in the reverse direction.
Why Gree GWH12MB-D3DNA3D Air Conditioner unit cannot operate immediately?
When a Gree Air Conditioner is stopped and then restarted, it will not operate immediately. It will wait approximately 3 minutes to protect itself.
General| Cooling Capacity | 12000 BTU/h |
|---|---|
| Heating Capacity | 12000 BTU/h |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Weight | 9 kg |
| Type | Split System |
| Energy Efficiency Ratio (EER) | 3.5 |
| Energy Efficiency Ratio (Cooling) | 3.21 W/W |
| Noise Level (Outdoor) | 52 dB(A) |
| Outdoor Unit Dimensions (WxHxD) | 320 mm |
Ensure stable voltage, proper wiring, and circuit protection to prevent electrical hazards.
Maintain clear airflow, keep flammable items away, and avoid blocking vents.
Procedure for handling smoke/smell and the prohibition of self-repair.
Do not damage power/control cords; use qualified personnel for replacement.
Use the remote controller to adjust vertical and lateral airflow direction as needed.
Avoid inserting objects, direct airflow on living things, prolonged cold exposure, misuse, water contact, or proximity to heaters.
Explains heat absorption for cooling and anti-freezing mechanism at low temperatures.
Details heat transfer for heating, defrosting process, and anti-freezing in heat mode.
Identifies and labels key components of the indoor air conditioner unit.
Learn to operate basic functions like power, mode selection, fan speed, sleep, clock, and light.
Adjust fan speed (Auto, Low, Mid, High) and activate Sleep mode for comfort.
Set the clock time and control the display light on the remote control.
Increase or decrease the set temperature using '+' and '-' buttons on the remote.
Activate Turbo for rapid cooling/heating and X-FAN for drying the evaporator.
Switch between displaying set temperature and ambient room temperature.
Set scheduled timer for turning the unit on or off automatically.
Adjust the vertical swing angle of the louvers for directed airflow.
Basic steps for operating the air conditioner: power, mode, temperature, fan speed, and swing.
Guides on using Sleep, Timer, Light, Turbo, X-FAN, and Auto Run features.
Lock or unlock the remote control keypad to prevent accidental changes.
Detailed instructions for controlling the swing direction of the air louvers.
Switch between Celsius (°C) and Fahrenheit (°F) temperature display modes.
Instructions and precautions for replacing batteries in the remote control.
Using the manual switch for operation or stopping when the remote is lost or damaged.
Instructions for removing, washing, and reinstalling the front panel for cleaning.
Guidance on cleaning air filters every three months to maintain performance.
Detailed steps for removing, cleaning, and reinserting air filters.
Essential checks before operating the unit to ensure proper function and safety.
Steps for maintaining the unit after use, including cleaning and rust prevention.
Explanation for unit delay on restart and unusual smells from the outlet.
Causes for water flow sounds and mist emission during cooling operation.
Troubleshooting creaking noises and complete unit non-operation.
Addressing poor cooling/heating efficiency and wireless remote control unavailability.
Troubleshooting inability to deliver air and moisture on the outlet vent.
Diagnosing water leakage, unit noise, and the normal defrosting process.
Situations requiring immediate shutdown and dealer contact due to severe faults.
Key advisories for unit installation, including professional work and circuit requirements.
Guidelines on unsuitable locations to avoid malfunction and ensure proper installation.
Criteria for selecting the optimal position for the indoor unit for performance and access.
Ensuring proper power supply, wiring, and circuit protection for safe operation.
Procedures and requirements for reliable earthing of the appliance.
General notes on wiring, fuses, national regulations, and user restrictions.
Diagram showing required clearances around the indoor unit for installation.
Instructions for horizontally mounting the rear panel securely.
Creating and preparing the wall hole for piping and wiring.
Connecting and routing the drain hose for proper condensate removal.
Steps for connecting indoor and outdoor unit electrical and signal wires.
Guides on routing piping and wiring from the unit to the exterior.
Procedure for aligning and tightening flare nuts for pipe connections.
List of items to check after installation to prevent potential malfunctions.
Steps for performing the initial test operation to verify unit functionality.
Instructions for installing the healthy filter into the air conditioner unit.
Guidance on cleaning various types of healthy filters, with special notes.
Information on the typical usage lifetime of healthy filters.
