51
Technical Information
Service Manual
Buttons on remote controller
Wifi Health
Light
On/Off
Clock
Timer off
Timer on
LR-swing
UD-swing
Wifi Health
Light
On/Off
Clock
Timer off
Timer on
LR-swing
UD-swing
Introduction for icons on display screen
X-FAN function
Humidity control
Power limiting operation
Set temperature
Indoor ambient
temp.
Indoor ambient
humidity
Operation mode
Turbo mode
Send signal
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Quiet
Set fan speed
Sleep mode
TIMER ON / TIMER OFF
Set time
Left & right swing
Up & down swing
Child lock
Fast cool
Health function
WiFi function
LED
Auto LED
I feel
NOTE:
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which the
model doesn't have, if press the corresponding button on the
remote controller, the unit will keep the original running status.
● After putting through the power, the air conditioner will give out
a sound. Power indicator " " is ON. After that, you can operate
the air conditioner by using remote controller.
● Under on status, pressing the button on the remote controller,
the signal icon " " on the display of remote controller will blink
once and the air conditioner will give out a "di" sound, which
means the signal has been sent to the air conditioner.
1. On/Off button
Press this button to turn on the unit. Press this button again to turn
off the unit.
2. Mode button
Press this button to select your required operation mode:
● When selecting auto mode, air conditioner will operate
automatically according to ambient temperature. Press "Fan"
button can adjust fan speed. Press " " / " " button can adjust
fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool
mode. Press " + " or " - " button to adjust set temperature. Press
"Fan" button to adjust fan speed. Press " " / " " button to adjust
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low
speed under dry mode. Under dry mode, fan speed can't be
adjusted. Press " " / " " button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan,
no cooling and no heating. Press "Fan" button to adjust fan speed.
Press " " / " " button to adjust fan blowing angle.
● When selecting heat mode, the air conditioner operates under
heat mode. Press " + " or " - " button to adjust set temperature.
Press "Fan" button to adjust fan speed. Press " " / " " button to
adjust fan blowing angle.
NOTE:
● For preventing cold air, after starting up heat mode, indoor unit
will delay 1~5 minutes to blow air (Actual delay time depends on
indoor ambient temperature).
6.2 Remote Controller Introduction for YBE1FB6
To Next Page
Loading...
