101
Installation and Maintenance
Service Manual
A2/A3/A6 panel display
Screws
4.Remove electric box cover 2 and detecting plate(WIFI)
5.Remove front case sub-assy
6.Remove display
Remove the screw on the electric box cover
2 and detecting plate(WIFI) to remove the
electric box cover 2 and detecting plate(WIFI).
Note:
ķ
Open the screw caps before removing the
screws arround the air outlet.
ĸ
case sub-assy is different for different
models.
Loosen the connection clasps between front
case sub-assy and bottom case. Lift up the
front case sub-assy and take it out.
Screw off the 2 screws that are locking the
display board.
Note:
Applicable for A2/A3/A6panel.
a
b
Electric box cover 2
Detecting plate
(WIFI)
Screw
Screws
To Next Page
Loading...
