Gree GWH24YE-S6DBA2A/I - 6 Function and Control; Remote Controller Introduction

Service Manual
6. Function and Control
6.1 Remote Controller Introduction
Buttons on Remote Controller
L I Q
(before opening cover)
0 ON/OFF button
FAN button
MODE button
+/- button
(after opening cover)
ON/OFF button
FAN button
O MODE button
+/- button
@ TURBO button
0 ~ button
^1 button
@ CLOCK button
@ TIMER ON/
TIMER OFF button
® TEMP button
0 # ■ /£ button
® I FEEL button
© LICbHT button
® X-FAN button
(EG QUIET" button
(H> SLEEP button
Introduction for Icons on Display Screen
I feel -
Quiet-
Operation mode
Auto mode -
Cool mode -
Dry mode
Fan mode-
t Heat mode — m
Clock-
Sleep mode-
Light -
vjfi
A
^AUTO (D ^ Ô -
*? H H m
0
'|QP.O'PHOUR
i D Q - O O o n o f f
-V -
----------Set fan sp^ejesd
---------- Turbo mode
----------Send signal
---------- Healtay mode
----------Scavenging functions
----------8"C(46<Sefeating function
--------- Set temperature
This is a general remote controller. Some
■ models fave this functio n while some do
not. Please refer to tfe actual models.
--------- X-FAN functicn
Set time
---------- TIMER ON /TIMER OFF
f t : Set temp.
Temp. display type
Child lock
■ Up & down swing
"Left & right swing
0 « : Outdoor ambient temp.
Q : Indoor ambient temp. i
Introduction for Buttons on Remote Controller
Note:
• After putting through the power, the air conditioner will give out a sound.Operation indictor " (^) " is ON (red indicator). After that, you can
operate the air conditioner by using remote controller.
• Under on status, pressing the button on the remote controller, the signal icon " ^ " on the display of remote controller will blink once and
the air conditioner will give out a “de” sound, which means the signal has been sent to the air conditioner.
• Under off status, set temperature and clock icon will be displayed on the display of remote controller (If tim er on, tim er off and light
functions are set, the corresponding icons will be displayed on the display of remote controller at the same time); Under on status, the
display will show the corresponding set function icons.
1. ON/OFF button
Press this button, the unit will be turned on, press it once more, the unit will be turned off. Sleep function will be canceled, while unit off.
14
0 # # • • • Technical Information