Service Manual
6.3 Operation of Smart Control (Smart Phone, Tablet PC)
Operation Instructions
Download and install APP
Scan the following QR code with your smart phone and download Wifi Smart.
Install the APP according to its guidance. When successfully installed, your smart phone homepage will show this icon
User of IOS system can search for the Wifi Smart in Apple store to download the Apple version APP. Android user can
search "WiFi Smart" on Google Play to download it.
Configuration
NOTE: Select either the original configuration or AP configuration according to the APP functions.
1.Original configuration
Before operation, please finish the following configuration in order to realize Wifi control and the connection between air conditioner and
intelligent device.
(l).Short-distance control setting for air conditioner using wifi hotspot
Step 1: Air conditioner wifi is set in APP mode in factory.
You can search the air conditioner wifi hotspot through your smart phone.The name of wifi hotspot is the last 8 numbers of the air
conditioner mac address. Password is 12345678.
ity X E L S ,« n | 1l:34
• :
Smart network switch
WLAN networks
Smart network switch
WLAN networks
a07a020d
Cernpcttd
«
gr-cn
Saved, Sec« ed
gr-dh
Seevred
t a
gree*iy
gree-ly_5G
Secured (WPS available
Step 2: Open APP and the screen will show the air conditioner that you just connected. Tap the name of this air conditioner on your
phone to enter and realize short-distance control, as shown below. Please refer to "Functions introduction" for specific control methods.
■
_____
mg
ii;37
=
Device
+
Air conditioner
V
J a0 7 a0 2M * 3CTC 0
Installation and Maintenance
» • • •
33
To Next Page
Loading...
