Gree GWH24YE-S6DBA2A/I - Page 40

Service Manual
2.Personal settings
Purpose: Set name (device name, preset name, etc.) and images (device image) in order to identify a user easily.
(1) Set device name
After quick configuration, a list of controllable smart devices will be generated. Default name for air conditioner is the last 8 numbers of
the air condtioner mac address.
No SIM Card H ■ '©' «• 99% Q 10:39
= D ev ic e
+
L g M AGreeAC
a0b45dd8
# 26 ” C Ô
a0b4941f
Û 1 o
a0b49377
# 26 ” C 0
L j a0b4935b
«^ Æ a0b417ac
A ir p u rif ie r
Gree Air Purifier
DN A
>
Step 1: Tap and hold the Wifi model name, such as “a0b417ac”, to enter the page "Edit device". Tap "Image" to select the source of
image. Select from "Default images " or " Take photo" or "Choose from photos" and save an image.
No SIM Card □ Q ■
iS f
100% ■ 17:05
Edit device
Save
ba byroom
cm
Temperature unit
Firmware update
Step 2: Tap "Name" to change device name. Save it and the new device name will be shown. Enable button "Lock device"to lock the
device so that other smart phones can't search the device. Tap "Temperature unit" to change the temperature unit.
No SIM Card 0 y> 1 '©' ^ 99% Q 17:03
< Edit device
Save
Image
y
Name a0b45dd8
Lock device
c m
Temperature unit Celsius^
Firmware update
Notice: If this device is not locked, other phones within the local area network can be found through wifi smart APP and operate the
device.
Step 3: Tap "Firmware update" to upgrade the firmware of the device. Tap"1.7" and then the device will be updated automatically.
Installation and Maintenance 0
37