Service Manual
Tap "Name" to customize the preset name.
Preset device can't be selected and it will default to "babyroom". Select "On" for the timer type. Select repeating days to complete the
preset.
Multi-device preset: This can preset multiple devices to execute a command at a specific time.
Please refer to the instructions as how to set preset time, name, tim er type and repeating days for a single device.
Tap "Preset device" to select one or more devices. Then return to the page "Device".
(4) Link(This function is applicable to some models)
Select a m aster device. W hen the environm ent satisfies the param eters as set in the master device, slave devices will execute
commands to realize devices linkage.
Step 1: Set the parameters of master device (Select master device, select environment parameters, select master device status).
Tap K B at the top right corner of the homepage "Device". Select "Link" and enter the page "Add linkage". Tap "Device/Param" to enter
the pa g^'S elec t device". Take "baby room" as an example. Tap "babyroom".
Enter the page "Select environment parameters".
Installation and Maintenance 0
41
To Next Page
Loading...
