Service Manual
Step Procedure
3.Remove display and panel
Screws that are locking the display board.
Separate the display board from the front
panel.
Open the front panel; separate the panel
rotation shaft from the groove fixing the
front panel and then removes the front
panel.
Screws
4.Remove electric box cover 2
Remove the screws on the electric box
cover to remove the electric box cover 2.
5.Remove front case sub-assy
Remove the screws fixing front case.
Loosen the clasps of front case Life the
front case sub-assy upwards to remove
it.
Front case sub-assy
6. Remove vertical louver
Loosen the connection clasps between
vertical louver and bottom case to
remove vertical louver.
90
£ Installation and Maintenance
To Next Page
Loading...
