GREE Air-ccoled Closed Control Unit Service Manual
78
After self-checking is completed, the result will be showed on “network” of “network view”. If
the result is conflict with present equipment, following dialog box will be popup and user has to
select one of the result (it is advised to select the last self-checking result).
Note: main module could be connected with maximumly four submodules. During
self-checking, no matter if there’s submodule, once the system is connected, it could be
inspected and showed in network view. If no submodule exists, it will show communication
malfunction.
Click Main Menu->System->Connect management, (COM1 is applied in this example) and
then click "OK".
To Next Page
Loading...