GREE Air-ccoled Closed Control Unit Service Manual
74
Device(4) in Module(1), when the check box before “No” is selected, the setting information in
related blue frame will be sent to the unit after pressing “OK”, otherwise the settings in blue
frame is invalid.
Check whether the modification is success or not by returning to the main interface.
● Left click any Device in Module(2), select "The machine set control" in popup menu after right
click, as following picture shows:
Popup control interface is as following, notice the red frame part, since there’s no Device (3)
and Device(4) in Module(2), the related control part is not available for setting. Other operations
are the same as 2.8.1.
To Next Page
Loading...