GREE Air-ccoled Closed Control Unit Service Manual
79
Click Main Menu->Control->Link an equipments ，the system will start checking
according to saved connection. Related parameter will be displayed if the communication is
normal.
Click Main Menu->Control->Break to open a conjunction
, the system will stop
monitoring to all the equipments.
4.4.2 Project information
Before monitoring, users have to select a project. Click Main Menu->System->The
engineering install and the following interface will show. Fill in the project information, click
“update” and “OK” to confirm.
4.4.3 Installation information configuration
Unit name: normally refer to the places where the AC installed, like “living room”,
To Next Page
Loading...