GREE Air-ccoled Closed Control Unit Service Manual
80
“bedroom”, it is named by user.
After the equipment is added, user can specify the building, floor and room according to
actual installation position for convenient monitoring. The unit information can be review at
“position” of “network view” in main interface. Click Menu->System->Units install Configuration
and the following interface will appear.
Add unit: after the information of building, floor, room and description is filled in, select the
equipment need added in “the equipment haven’t yet define” frame and click
, following
dialog box will be popup. Fill in unit name and click “OK”, that equipment will be displayed in
“The equipments have defined”, click “add” to finish the operation.
Delete unit: select the unit need delete in the drop-down list and click “delete”.
Note: same unit name cannot be added for different equipments.
To Next Page
Loading...