EasyManua.ls Logo

Gree JS13

Gree JS13
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Receiver JS13
4
3.1.1 Selection Requirement for Communication Wire
Figure 3-2 Length of Communication Wire
Wire material type
Total length of
communication
wire between
indoor unit and
wired controller L
(m)
Wire size
(mm
2
)
Material
standard
Remarks
Light/Ordinary
polyvinyl chloride
sheathed twisted
pair cord
L≤250
2×0.75~
2×1.25
GB/T 5023.5-
2008
Total length of
communication wire
can't exceed 250m.
Shielded
light/Ordinary
polyvinyl chloride
sheathed twisted
pair cord
L≤250
2×0.75~
2×1.25
GB/T 5023.5-
2008
If unit is installed in
places with intense
magnetic field or strong
interference, it is
necessary to use
shielded wire
NOTES:
If unit is installed in places with intense magnetic field or strong interference,
the communication wire of the receiver must be shielded twisted wire.