Gree KF-70DW/NA1 - Cool Mode Operation

REMOTE CONTROL OPERATION PROCEDURE
7.10
16
～30
4.
5.
2.
3.
1.
20
COOL mode operation
Press the button to start
the FAN, and set the fan speed.
Press the SWING button,
the louver will automatically
swing and when repressed,
it will stop to swing.
Press the button to ad-
just the suitable tempera-
ture.
Press MODE
button to select
When pluged in,press 1/
0 button, the unit will start
to run.
Microcomputer will accord to the room sensor detected the temp. and setting temp. differences
to start the cool operation or not.
The room sensor detected temp. is higher than setting temp., the cool mode operate.
The room sensor detected temp. is lower than setting temp., indoor fan motor will stop running,
water valve will be turned off, cool operation will stop.
Temp. setting range is
.