How to fix a Gree KY-32Na/D that doesn't start?
If your Gree Air Conditioner isn't starting, first, ensure the power plug is tightly inserted. If that doesn't work, try replacing the power plug or socket. If there is still no power, the fuse might be broken, in that case ask a maintenance person to replace the fuse.
What to do if my Gree KY-32Na/D LCD displays 'E4'?
If the LCD of your Gree Air Conditioner displays "E4", it means the water tank is full. You should drain the water out. If the problem persists after draining, please contact a maintenance person.
What does it mean when my Gree Air Conditioner LCD displays 'E1'?
If the LCD of your Gree Air Conditioner displays "E1", it indicates that the power supply is unstable. Cut off the power supply, and after 10 minutes, turn the unit back on. If the "E1" is still displayed, contact a maintenance person.
Why is my Gree KY-32Na/D not blowing cool air in COOL mode?
If your Gree Air Conditioner is set to COOL mode but there's no cool wind, it could be due to two reasons: either the room temperature is lower than the set temperature (which is normal), or the unit is running a defrosting operation. In the latter case, it will return to normal operation after defrosting.
What to do if the Gree Air Conditioner LCD displays the time but isn't working?
To solve this issue with your Gree Air Conditioner, cancel the "SET TIMER" operation or wait for the auto running to start.
Guidelines for placing the unit to ensure proper operation and ventilation.
Requirements and precautions for connecting the unit to the electrical power supply.
Explanation of the symbols and indicators shown on the unit's LCD display.
Detailed explanation of each button on the unit's control panel and their functions.
Instructions for operating the air conditioner in COOL mode.
Instructions for operating the air conditioner in HEAT mode.
Instructions for operating the air conditioner in DRY mode.
Instructions for operating the air conditioner in FAN mode.
Instructions for operating the air conditioner in AUTO mode.
Procedure for handling water drainage when the tank is full.
Explanation of the remote control's LCD display and buttons like ON/OFF, SEND, SLEEP, DRY.
How to use MODE, TEMP, and FAN buttons on the remote for adjustments.
How to use TIMER and Hr/Min buttons for time adjustments and sleep settings.
Procedures for power interruption and resuming operation.
Instructions for attaching the castors to the unit for mobility.
Instructions for connecting the drainage pipe for condensate removal.
Steps for installing the exhaust duct for hot air expulsion.
Information on moving the unit using its castors.
Instructions on how to disassemble and clean the air filter.
Guidelines for cleaning the exterior of the air conditioner unit.
Important considerations for where to install the unit to avoid malfunctions.
General user advice, safety precautions, and placement recommendations.
Information on proper disposal of the product and contacting customer service.
General| Cooling Capacity | 3200W |
|---|---|
| Power Supply | 220-240V, 50Hz |
| Power Consumption Cooling | 1230W |
| Refrigerant | R410A |
| Noise Level (Indoor) | 52 dB(A) |
| Type | Portable |
To Next Page
