－7 －
OPERATING METHODS
Control panel and the function
1. "ON/ OFF "
Press once to start and press once more to stop the unit.
2."MODE"
Press this button to change the operation mode in order of:
ＦＡＮ → ＣＯＯＬ →ＨＥＡＴ→ ＤＲＹ → ＡＵＴＯ → ＦＡＮ
3 "FAN "
When the unit is running in the "FAN", "COOL" mode there are 3 kinds of fan speed could
be selected, press "FAN " to choose between "LOW → MD → HIGH".
4." TEMP"
When turn on the air conditioner, in the "COOL", mode, the control panel will display the set
temp. Press "▲"""to increase or to decrease the set temperature.
5. " TIMER"
Press"▲""" to set the time for timer on or timer off. When the unit is running, you could set the
timer off, the unit will stop running; When the unit is stop running (not power off ) set the timer on, the
time interval being set will be 0.5-24 hour(s), press "▲""" to adjust.
6. " SLEEP"
When the unit is running, press once to set "SLEEP" operation, repress it, the unit will stop the "SLEEP"
operation, there is no "SLEEP" operation in "AUTO" mode.
7. " HEAT"
Press the "mode" button, select the heating mode, the LCDwindow shows" ".
To Next Page
Loading...
