Gree KYD-32Na/D - Exhaust Duct Installation

－16 －
TIMER MODE OPERATION
1. When the unit is running, press
"TIMER" , to set the TIMER operation.
2. Press "Hr/Min" , to set the TIMER
ON, it can be selected in the range of
1-18 hours.
3. Press "SEND" , send the operation to
the unit.
to set the TIMER OFF, it could be
selected in the range of 1-7 hours.
4. Press "SLEEP" , then press the "Hr/Min",
● After the SET TIMER ON, the unit turns off at once, when the set
time arrived, the unit will run in the original mode.
● Press "TIMER" , to select "TIME", the screen will display the
current time, press "Hr/Min" to adjust the number of current hour or
minute.
● When pressing the "SLEEP" to set the "SLEEP" mode, the "SET
TIMER" mode will be canceled, when selecting the "SET TIMER"
mode, the "SET SLEEP" mode will be canceled.
ON/OFF
HIGH
TIMER
MODE
FAN
SEND
TIMER
DRY
Hr
SLEEP
Min