How to check voltage measurements for Gree RIO12HP230V1A Air Conditioner Indoor Fan Motor?
To troubleshoot out-of-range resistance measurements in the Indoor Fan Motor of your Gree Air Conditioner, ensure the power is off with the ‘PG’ connector removed. Then, check the voltage measurements against the provided charts.
What to do if Gree Heat Pump has outdoor coil temperature thermistor issues?
If your Gree Heat Pump is having outdoor coil temperature thermistor issues, look into the connection and evaluate the Outdoor Coil Sensor. A bad connection or failure of the outdoor coil sensor could be the cause.
How to troubleshoot Gree Heat Pump outdoor air temperature thermistor?
To troubleshoot the outdoor air temperature thermistor in your Gree Heat Pump, check the connection and assess the Outdoor Ambient Sensor. The issue may stem from a bad connection or failure of the outdoor ambient sensor.
What causes Gree Heat Pump indoor coil temperature thermistor problems?
Indoor coil temperature thermistor problems in your Gree Heat Pump can be caused by a bad connection or failure of the indoor coil sensor. Examine the connection and test the Indoor Coil Sensor to see if it has failed.
How to fix Gree Heat Pump indoor air temperature thermistor issues?
To fix indoor air temperature thermistor issues in your Gree Heat Pump, inspect the connection and functionality of the Indoor Air Sensor. The problem may be a bad connection, or the indoor air sensor may have failed.
Why does Gree Heat Pump show compressor synchronism error?
A compressor synchronism error in your Gree Heat Pump could be due to high pressure, low voltage, or bad connections. Check the system's pressure levels, ensure the voltage is adequate, and inspect the connections.
What to do if Gree Heat Pump has a 4-way valve malfunction?
If your Gree Heat Pump is experiencing a 4-way valve malfunction, it could be due to a bad connection, solenoid failure, or a malfunction within the valve itself. You should evaluate the connection, test the solenoid, and check for any valve malfunctions.
What causes IPM module protection in Gree Heat Pump?
The IPM Module protection in your Gree Heat Pump activates if the IPM Module temperature is too high, due to high ambient temperature, low voltage, or bad connections. Ensure the IPM Module is operating within proper temperature limits, and assess the ambient conditions and connections.
What causes high current protection in Gree Heat Pump?
High current protection in your Gree Heat Pump may be due to an unstable power supply with a voltage range that's too large. You should verify the stability of the power supply and make sure the voltage range is within acceptable limits.
Why does my Gree Heat Pump have compressor overload protection?
Compressor overload protection in your Gree Heat Pump can be triggered by a few reasons: low refrigerant charge, a blocked capillary, or a failure in the compressor motor. It's recommended to inspect the refrigerant charge, check for any blockages in the capillary, and assess the condition of the compressor motor.
General| Power Supply | 1Ph, 230V, 60Hz |
|---|---|
| Refrigerant | R410A |
| Voltage | 230V |
| Cooling Capacity | 12000 BTU/h |
| Weight (Indoor Unit) | 9.5 kg |
| Weight (Outdoor Unit) | 32 kg |
| Outdoor Unit Noise Level | 52 dB |
| Indoor Unit Dimensions (WxHxD) | 840x290x195 mm |
| Outdoor Unit Dimensions (WxHxD) | 30.3 x 21.7 x 11.8 inches |
| Indoor Unit Weight | 9.5 kg |
| Outdoor Unit Weight | 32 kg |
To Next Page
