Greenlee 555CX - Table of Contents; Safety; Purpose of this Manual; Other Publications

555
®
Series Electric Benders
Greenlee / A Textron Company 4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
All specications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
555 is a registered trademark of Textron Innovations Inc.
KEEP THIS MANUAL
Table of Contents
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Other Publications ......................................................... 2
Important Safety Information .....................................3–5
Service Instructions ..................................................6–11
Illustrations and Parts Lists
Main ....................................................................12–17
Bending Attachments .........................................18–19
Wiring Diagrams .......................................................... 20
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This manual and any
markings on the tool provide information for avoiding
hazards and unsafe practices related to the use of this
tool. Observe all of the safety information provided.
Purpose of this Manual
This manual is intended to familiarize authorized
Greenlee service center personnel with the safe opera-
tion and maintenance procedures for the Greenlee 555
®
Series Electric Benders.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
Other Publications
Instruction Manuals:
• 555DX and 555CX: Publication 52055799
• 555DX-22: Publication 52060434
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.