Greenlee DM-60 User Manual

999 6760.0 © 2004 Greenlee Textron Inc. 12/04
DM-60
Digital
Multimeter
Multímetro
digital
Contrôleur
numérique
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D’INSTRUCTIONS
Read and understand all of the instructions
and safety information in this manual before
operating or servicing this tool.
Lea y entienda todas las instrucciones y la
información sobre seguridad que aparecen
en este manual, antes de manejar esta
herramienta o darle mantenimiento.
Lire attentivement et bien comprendre
toutes les instructions et les informations sur
la sécurité de ce manuel avant d‘utiliser ou de
procéder à l‘entretien de cet outil.

Greenlee DM-60 Specifications

General

Category	Multimeter
Model	DM-60
Brand	Greenlee
Display Type	LCD
Continuity Test	Yes
Diode Test	Yes
Battery Type	9V
Safety Rating	CAT III 600V
Auto Power Off	Yes
Data Hold	Yes
Temperature Range	-4 to 1832°F (-20 to 1000°C)

Summary

Instruction Manual

Product Overview

Description

Details the capabilities of the Greenlee DM-60 Digital Multimeter.

Safety Focus

Highlights the importance of safety in using Greenlee tools and equipment.

Manual Purpose

Explains the manual's intent to familiarize personnel with safe operation.

Important Safety Information

Safety Alert Symbol Definitions

Defines the SAFETY ALERT SYMBOL and signal words (DANGER, WARNING, CAUTION).

Identification and Symbols

Component Identification

Identifies the various parts and terminals of the DM-60 multimeter.

Display Icons

Explains the meaning of icons displayed on the multimeter's LCD.

Unit Symbols

Illustrates and defines safety and function symbols found on the unit.

Operating the Multimeter

Using Features: HOLD and MAX

Describes the function and operation of the HOLD and MAX buttons.

Operation Settings

Settings Table

Guides on setting the selector and connecting leads for various measurements.

Typical Measurements

Voltage and Current Measurements

Illustrates how to perform voltage and current measurements with the multimeter.

Resistance and Continuity Measurements

Resistance Measurement

Shows the procedure for measuring electrical resistance.

Continuity Check

Demonstrates how to perform a continuity test on circuits.

Diode Measurement

Diode Measurement Procedures

Demonstrates how to conduct diode measurements in forward and reverse bias.

Accuracy

AC/DC Current and AC Voltage Accuracy

Details accuracy specifications for AC/DC current and AC voltage.

Accuracy Details

DC Voltage, Resistance, Frequency Accuracy

Provides accuracy details for DC voltage, resistance, and frequency measurements.

Diode Test and Continuity Specs

Specifies parameters for diode testing and continuity resolution.

General Specifications

Device Specifications

Lists display, overload protection, operating conditions, and battery type.

Measurement Categories

Category Definitions

Explains definitions for Measurement Categories I, II, III, and IV.

Statement of Conformity

States the instrument's certification and calibration traceability.

Maintenance

Maintenance Precautions

Covers precautions for user-serviceable parts and environmental limits.

Battery Replacement

Step-by-step guide for replacing the multimeter's battery.

Maintenance Procedures

Fuse Replacement

Instructions for replacing fuses, emphasizing correct type and safety.

Cleaning Instructions

Advice on how to clean the multimeter case using mild detergent.

Warranty and Support

Lifetime Limited Warranty

Details the lifetime limited warranty terms for Greenlee products.

Technical Assistance Contact

Provides contact information for technical assistance and customer service.