To Next PageTo Next Page
Need help?Do you have a question about the Greenlee DM-50 and is the answer not in the manual?
Explains the safety alert symbol and hazard signal words (Danger, Warning, Caution).
Advises reading the manual and warns about electric shock and fire hazards.
Warns against exceeding voltage limits, operating with an open case, and improper fuse use.
Guides on setting the selector, testing the unit, and taking readings.
Table detailing selector settings for various measurement characteristics.
Details accuracy and overload protection for AC and DC voltage measurements.
Details accuracy and overload protection for DC current measurements.
Details accuracy and overload protection for resistance measurements.
Explains the safety alert symbol and hazard signal words (Danger, Warning, Caution).
Advises reading the manual and warns about electric shock and fire hazards.
Warns against exceeding voltage limits, operating with an open case, and improper fuse use.
Guides on setting the selector, testing the unit, and taking readings.
Table detailing selector settings for various measurement characteristics.
Details accuracy and overload protection for AC and DC voltage measurements.
Details accuracy and overload protection for DC current measurements.
Details accuracy and overload protection for resistance measurements.
General| Type | Digital Multimeter |
|---|---|
| Model | DM-50 |
| Brand | Greenlee |
| Display | LCD |
| Display Count | 4000 |
| Frequency Range | 10 Hz to 10 MHz |
| Continuity Test | Yes |
| Diode Test | Yes |
| Battery | 9V |
| Safety Rating | CAT III 600V |
| Resistance Range | 400 Ω, 4 kΩ, 40 kΩ, 400 kΩ, 4 MΩ, 40 MΩ |
| Capacitance Range | 40nF to 100µF |
| Temperature Range | -20 °C - 1000 °C |
