Greenlee G3 - Table of Contents; Description; Safety; Purpose of this Manual

G3 Tugger
®
System
Greenlee / A Textron Company
2
Description
The Greenlee G3 Tugger
®
Cable Pulling System is
intended to pull cable through conduit for light-duty
applications.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee G3 Tugger
®
Cable Pulling System.
Keep this manual available to all personnel.
All specications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
G3 Tugger is a registered trademark of Textron Innovations Inc.
® Registered: The color green for cable pulling equipment is a
registered trademark of Textron Innovations Inc.
KEEP THIS MANUAL
Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
General Safety Rules ..................................................... 3
Specic Safety Rules and Symbols ........................... 4-6
Grounding Instructions .................................................. 6
FUNCTIONAL DESCRIPTION
Identication .............................................................. 7
Specications ............................................................ 8
Planning the Pull ........................................................ 8
ASSEMBLY
Boom Assembly/Disassembly ................................... 9
Boom Setup ........................................................ 10-11
Typical Setup for an Up Pull ................................. 11
Typical Setup for a Down Pull .............................. 11
Typical Setup for a Side Pull ................................ 11
OPERATION
Nose Assembly Operation ....................................... 12
Boom Operation ...................................................... 12
Handle Operation ..................................................... 12
Pivoting the Elbow and Nose Units ......................... 13
Puller Operation ....................................................... 14
SERVICE
Maintenance ............................................................ 15
ILLUSTRATIONS AND PARTS LISTS
G3 Tugger
®
Cable Pulling System .......................... 49
Head Assembly ........................................................ 50
Mobile Carriage ....................................................... 50
Motor Assembly .................................................. 51-52
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com