Remote Cable Cutter
52087760 REV 014
© 2020 Greenlee Tools, Inc.
• Do not perform any maintenance other than
as described in this manual. Personal injury or
damage to the tool may result.
• Do not open the tool. It contains no user-
serviceable parts
Storage
Remove batteries from the tool and remote before
extended storage. If necessary, recharge the batteries.
Refer to the instructions supplied with the battery
charger.
Maintenance
• Clean the housing with a damp cloth and mild
detergent after every use. Dry completely, remove the
battery and fully retract the blade before storing.
• Do not sharpen blades, send in for service to replace
blades.
• Failure to follow required service schedule could
compromise the tool and result in serious injury.
Service
At either 3 years or 10,000 cycles, the tool will stop working and factory service of the tool must be completed before
tool will resume working. Factory service includes general inspections, replacement of tool's di-electric hydraulic oil
and testing of tool by trained technicians.
When the Factory Service Date is approaching or arrived, contact Greenlee Customer Service. Expedited shipping is
available.
Routine Service Calendar Service Date Notes
Date Placed into Service
Date of First Factory Service
Date of Second Factory Service
Date of Third Factory Service
Date of Fourth Factory Service
Date of Fifth Factory Service
Date of Sixth Factory Service
Date of Seventh Factory Service
Date of Eighth Factory Service
Date of Ninth Factory Service
Date of Tenth Factory Service
Use this schedule to help track when your tool is due in for factory service.
To Next Page
Loading...
Need help?
General
