Remote Cable Cutter
552087760 REV 0
© 2020 Greenlee Tools, Inc.
* The text used in the General Power Tool Safety Warnings section of this
manual is required from the applicable EN 62841-1 standard to which this tool
is tested. This section contains general safety practices for many different types
of power tools. Not every precaution applies to every tool, and some may not
apply to this tool.
• Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool.
• Power tools are dangerous in the hands of
untrained users.
• Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition that
may affect the power tool’s operation.
• If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation.
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling
and control of the tool in unexpected situations.
BATTERY TOOL USE AND CARE
• Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of BATTERY pack may create a risk of re
when used with another BATTERY pack.
• Use power tool only with specifically designated
BATTERY packs. Use of any other BATTERY packs
may create a risk of injury and re. When BATTERY
pack is not in use, keep it away from other metal
objects, like paper clip, coins, keys, nails, screws
or other small metal objects, that can make a
connection from one terminal to another. Shorting
the BATTERY terminals together may cause burns
or a re.
• Under abusive conditions, liquid may be ejected
from the BATTERY; avoid contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the BATTERY may cause
irritation or burns.
• Do not use a BATTERY pack or tool that is
damaged or modified. Damaged or modied
batteries may exhibit unpredictable behavior
resulting in re, EXPLOSION or risk of injury.
• Do not expose a BATTERY pack or tool to fire
or excessive temperature. Exposure to re or
temperature above 265°F (130°C) may cause
explosion.
• Follow all charging instructions and do not
charge the BATTERY pack or tool outside the
temperature range specified in the instructions.
Charging improperly or at temperatures outside
the specied range may damage the battery and
increase the risk of re.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tools is maintained.
• Never service damaged battery packs. Service
of battery packs should only be performed by
manufacturer or authorized service providers.
To Next Page
Loading...
Need help?
General
