5
Filter Life
Maintenance
Cleaning
Filter life depends upon the level of pollutants in the space being
cleaned. Filters should be replaced once a year to ensure the highest
quality of purication. Additional lters can be purchased through
GreenTech Environmental or a GreenTech Environmental dealer.
If your unit has stopped working properly, refer to your Warranty
Information (Page 7) for coverage and replacement instructions.
NOTE: For proper operation, the unit should be cleaned at least once per month.
1. Turn the unit OFF and remove the Power Plug.
2. Remove the Filter Screw from the Filter Cover.
3. Carefully remove the Filter from the unit.
WARNING: No part of this unit should come into contact with water during cleaning.
4. Blow the Filter out with compressed air or use a vaccum to
remove any dust or debris.
5. Blow the interior of your unit out with compressed air.
6. Replace the Filter, Filter Cover, and Filter Cover Screw.
7. Plug your unit in and return it to your previously set mode.
To Next Page
Loading...
