To Next PageTo Next Page
Need help?Do you have a question about the GreenTech GT3000 and is the answer not in the manual?
General| Model | GT3000 |
|---|---|
| Category | Air Cleaner |
| CADR (Clean Air Delivery Rate) | 200 CFM |
| Coverage Area | 300 sq. ft. |
| Power Source | AC 120V |
| Filter Type | HEPA + Activated Carbon |
| Technology | HEPA |
Register your new GreenTech Air Purification product within 10 days of purchase.
GreenTech Environmental declines all responsibility for all damages arising from improper use of the unit.
Highlights the advantages of the GT3000 air purification system for home use.
The GT3000 is your hassle-free provider for clean air and healthy living.
Details on how to get technical assistance and find solutions to common problems.
Explains PCO technology, its benefits in destroying biological contaminates and odors.
Describes how negative ions charge particles, making them easier to remove from the air.
Details adjustable settings to optimize performance and features like Away Mode timer.
Explains the multi-layer filter that uses friction to create a negative charge to attract particles.
Visual identification of the GT3000 unit's parts from front, rear, and side views.
Visual identification of unit components with rear cover removed, and the power supply.
Diagram illustrating the layout and buttons of the remote control.
Diagram illustrating the layout and buttons of the unit's main control panel.
Illustrations of the control panel screen's mode indicators and displays.
Factors to consider for optimal unit placement for air purification effectiveness.
Steps for calculating area and setting the unit for the first time.
Instructions for turning the unit on/off and using Normal, High, and Away modes.
Guidance on replacing the purification plate and PCO cell as indicated by LCD reminders.
Information on performing cleaning and resetting the 'Perform Cleaning' reminder.
Required tools and recommendations for a safe disassembly workspace.
Step-by-step guide to removing the rear cover, filter assembly, and front grille.
Step-by-step guide for reassembling the unit after cleaning or repair.
How to clean the outside surfaces and internal parts of the air purifier unit.
Detailed steps for cleaning the different filters in the assembly.
Specific instructions for cleaning the ionization needle, PCO cell, and purification plate.
Solutions for the unit failing to turn on or produce noticeable purification.
Troubleshooting arcs, odors, PCO cell, ionization needle, and fan malfunctions.
How to fix a rattling noise noticed when taking the unit out of packaging.
