Name: GreenTech GT3000
Brand: GreenTech
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Setup & Operation

LCD Reminders

Replace Plate

When “Replace Plate” appears, the Purication Plate has reached the end of its useful life and must be replaced. To order a replacement, contact your distributor or

GreenTech Environmental (www.GreenTechEnv.com). Once a replacement has been obtained, follow the instructions in “DISASSEMBLY/ASSEMBLY” to replace your

old Purication Plate with your new one.

Replace PCO Cell

When “Replace PCO Cell” appears, the PCO Cell has reached the end of its useful life and must be replaced. Contact your distributor or GreenTech Environmental (www.

GreenTechEnv.com) to order a replacement. Once a replacement has been obtained, follow the instructions in “DISASSEMBLY/ASSEMBLY” to replace your old

PCO Cell with your new one.

Perform Cleaning

“Perform Cleaning” will display once the 30 day operation cycle between cleanings has passed and the unit requires a complete cleaning. Follow the instructions in

“CLEANING” (page 17) then see “Resetting Reminders” (below) to reset the reminders. The Perform Cleaning reminder will appear again after 30 day of operation.

Resetting Reminders

After replacing the Purication Plate or the PCO Cell, the corresponding reminders will reset themselves. After performing a cleaning of the unit (see “CLEANING” page 17)

you should reset the reminders by holding down the Reset Reminders button on the Control Panel of the unit. The reminder has been reset when Perform Cleaning no longer appears.