Copyright © 2017 GreenTech Environmental, LLC.
4
Getting Started
Recharging
1. Press the Control Button once to turn pureAir FRIDGE ON.
2. Place the unit anywhere in your refrigerator, making sure the Purified
Air Vent is not covered or restricted in any way.
3. Press the Control Button once more to cease operation and turn the
unit OFF.
1. Remove the unit from the refrigerator and plug your charging
cable into the rear USB Charging Port until the Power Indication LED
changes from RED to GREEN.
NOTE: The Power Indication LED will turn Green when the unit is activated. Once the refrigerator
door is closed, the LED will turn off to preserve your unit’s battery life.
NOTE: When your battery has used all of its charge, an audible alarm and Red Power Indication LED
will notify you each time you open your refrigerator door. This audible alarm and Red LED will
only activate when light hits the photo sensor.
To Next Page
Loading...
