EasyManua.ls Logo

GreenTech pureAir FRIDGE - Cleaning and Maintenance Instructions

GreenTech pureAir FRIDGE
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
1. Remove the unit from your refrigerator and turn it off by pressing the
Control Button once.
2. Vacuum out the Air Intake and Purified Air Vent until clean.
3. Dip a cotton swab (Q-Tip) in Isopropyl Alcohol and insert it into the
Purified Air Vent. Gently rotate the swab and clean the entire area until
all visible contamination has been removed. Use a new cotton swab to
dry the previously cleaned area. Repeat with the Air Intake Vent.
4. Allow the unit to dry before charging or resuming operation.
Cleaning/Maintenance
NOTE: For proper operation, the unit should be cleaned every six (6) months.
NOTE: There are no serviceable parts in this unit. If you have any problems, contact your dealer or
GreenTech Environmental at 1-800-621-7201 or www.GreenTechEnv.com/Support.
NOTE: Blowing air into the Air Intake or Purified Air Vent in order to clean the unit is not advised.
This will only restrict future air flow and pollute the quality of air being emitted by your unit.

Related product manuals