Need help?Do you have a question about the GreenWorks 20062 and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Voltage | 40V |
| Bar Length | 8 inches |
| Battery Included | Yes |
| Charger Included | Yes |
Details the technical specifications for the 10 inch electric pole saw.
General safety guidelines for operating the pole saw safely.
Guidelines for using appropriate outdoor extension cords.
Information on polarized plugs and extension cord condition.
Recommendations for clothing, eye protection, and operator alertness.
Minimum gauge for extension cords and GFCI protection requirements.
Understanding and preventing kickback, safe handling practices.
Rules for safe cutting, including limb tension and two-handed operation.
Guidelines for maintaining the chain, cord, and general care.
Procedures for checking damaged parts and qualified servicing.
Explanation of symbols used on the product and their meanings.
Definitions of signal words like DANGER, WARNING, and CAUTION.
Advice on qualified service technicians and authorized service centers.
Requirements for circuit protection and handling damaged power cords.
Explanation of the double insulation feature for electrical safety.
Guidelines for proper grounding of the electrical outlet.
Table specifying minimum wire gauge for extension cords based on length and amp rating.
Diagram identifying key components of the pole saw.
Explanation of features like detachable saw, lock-off button, oil indicator, scabbard, and extension pole.
Instructions for unpacking, inspecting, and checking parts.
Procedure for connecting the pole sections for pole saw use.
Steps to attach the chainsaw unit to the pole assembly.
Instructions for detaching the chainsaw from the pole assembly.
Lists the intended uses of the pole saw as both a pole saw and a chainsaw.
Guide on how to add bar and chain lubricant to the reservoir.
Steps to connect the chainsaw to the power supply.
Steps to connect the pole saw configuration to the power supply.
Instructions on how to start and stop the pole saw motor.
Procedure for extending or shortening the pole assembly for optimal use.
Key steps and safety checks before starting cutting operations.
Step-by-step guide for making proper cuts to avoid damage and injury.
Guidance on cutting angles, limb removal, and safety distances from power lines.
Important safety reminders before performing any maintenance tasks.
Advice on cleaning plastic parts and avoiding damaging chemicals.
Instructions on how to check and adjust chain tension for optimal performance and safety.
Step-by-step guide for removing and installing the bar and chain.
Detailed steps for adjusting chain tension after replacing the bar and chain.
Instructions for checking and refilling the bar lube reservoir.
Signs that indicate the chain needs sharpening and factors affecting cutting ability.
Detailed procedure for sharpening the saw chain cutters using a file.
Troubleshooting for hot bar/chain and chain not rotating.
Details on what is covered and excluded under the manufacturer's warranty.
Contact information for warranty service and details on transportation charges.
Diagrams showing exploded views of specific component assemblies.
To Next Page
