5 MAINTENANCE
IMPORTANT
Carefully read and understand the safety regulations and the maintenance instructions before you clean, repair, or
do any maintenance on the product (Reference Safety regulations and maintenance instructions).
WARNING
• REMOVE BATTERY OR BATTERIES FROM THE PRODUCT BEFORE YOU DO ANY MAINTENANCE.
• FAILURE TO FOLLOW PROPER MAINTENANCE SERVICE, USING THIRD-PARTY REPLACEMENT
PARTS, OR MODIFYING/REMOVING COMPONENTS CAN RESULT IN INJURY TO THE USER.
5.1 MAINTENANCE SCHEDULE
The following is a list of the maintenance steps that must be performed on the product.
Maintenance Daily Weekly Monthly
Clean the outside of the product with a clean and dry
cloth. Never use water.
X
Keep handles dry, clean, and free from oil and grease. X
Make sure the trigger is functioning properly. X
Check that nuts and screws are tight. X
Check that the battery is intact. X
Check the battery's charge. X
Check that the release button works and locks the bat-
tery into place.
X
Check that the battery charger is intact and functioning
properly.
X
Inspect all couplings, connections, and cables for any
damage or dirt.
X
Check the connections between the battery and the
product, as well as the connection between the battery
and the battery charger.
X
5.2 CHECK THE AIR INTAKE VENT
CAUTION
A BLOCKED AIR INTAKE VENT AND/OR BLOCKED IMPELLER DECREASES THE BLOWING CAPACITY
OF THE PRODUCT AND INCREASES THE WORKING TEMPERATURE OF THE MOTOR. IF THE MOTOR
BECOMES TOO HOT, IT CAN RESULT IN MOTOR FAILURE.
9
English
EN
To Next Page
Loading...
