GreenWorks ST24B01 User Manual (English)

Other manuals for GreenWorks ST24B01

Questions and Answers:

E
Erika ShafferJul 31, 2025
How to fix a GreenWorks Trimmer that fails to start?
- R
  Richard OrtizJul 31, 2025
  If your GreenWorks Trimmer isn't starting, there could be a few reasons. First, make sure the battery pack is properly attached to the trimmer. If it is, try removing and reinstalling the battery to ensure good electrical contact. Also, check if the battery is depleted and needs charging. Finally, ensure you are pressing the lock-off lever and trigger simultaneously to turn on the trimmer.
C
Colleen DanielsAug 5, 2025
Why is the line not cutting well on my GreenWorks ST24B01 Trimmer?
- S
  Sara LozanoAug 5, 2025
  If the line on your GreenWorks Trimmer isn't cutting well, the line-cutting blade on the guard's edge might be dull. Sharpen the blade with a file or replace it with a new one.
J
Joshua HensleyAug 9, 2025
What to do if grass wraps around the head of my GreenWorks ST24B01 Trimmer?
- A
  Alicia CampbellAug 9, 2025
  If grass is wrapping around the trimmer head and motor housing of your GreenWorks Trimmer, it might be because you're cutting tall grass at ground level. To prevent this, cut tall grass from the top down, removing no more than 8 inches in each pass.
J
jessica47Aug 13, 2025
What to do if the line does not advance on GreenWorks ST24B01?
- S
  sosacynthiaAug 13, 2025
  If the line on your GreenWorks Trimmer isn't advancing, several factors could be at play. The lines might be welded together, in which case you should lubricate them with silicone spray. Alternatively, there might not be enough line on the spool, requiring you to install more. If the lines are worn too short, try advancing the cutting line. Lastly, tangled lines on the spool can cause this issue; remove the lines and rewind them.
H
Harry MillsAug 18, 2025
Why does the line keep breaking on my GreenWorks ST24B01?
- K
  Kendra RayAug 18, 2025
  The line on your GreenWorks Trimmer might be breaking because of incorrect use. Only trim with the tip of the line, avoiding stones, walls, and other hard objects. Regularly feed the line to maintain a full cutting width.
A
Ann WalkerAug 22, 2025
What to do if grass winds around the trimmer head of my GreenWorks ST24B01 Trimmer?
- M
  michellepetersAug 22, 2025
  If grass is winding around the trimmer head and motor housing of your GreenWorks Trimmer, it's likely due to cutting tall grass at ground level. Cut tall grass from the top down, removing no more than 8 inches in each pass to prevent wrapping.
P
ptaylorAug 27, 2025
What to do if my GreenWorks ST24B01 Trimmer stops while cutting?
- M
  mmorrisAug 27, 2025
  Your GreenWorks Trimmer might stop while cutting due to several reasons. First, check if the guard is mounted; if not, the trimmer line might be too long, overloading the motor. Remove the battery pack and mount the guard. Also, ensure you're using a nylon cutting line of 0.065" diameter or less. Grass tangled around the motor shaft or trimmer head can also cause this; stop the trimmer, remove the battery, and clear any grass. If the motor is overloaded, remove the trimmer head from the grass to allow it to recover. If the battery pack or trimmer is too hot, let them cool down. Check the battery pack connection and re-install it if necessary. Finally, ensure the battery is adequately charged.

GreenWorks ST24B01 Specifications

General

Type	String Trimmer
Battery Voltage	24V
Cutting Width	12 inches
Line Diameter	0.065 inches
Runtime	Up to 30 minutes
Power Source	Battery
Battery Type	Lithium-Ion
Charging Time	1 hour