EasyManua.ls Logo

GreenWorks STG310 - User Manual

GreenWorks STG310
192 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
STG310
G24ST25
OPERATOR MANUAL / BEDIENUNGSHANDBUCH / MANUAL DEL OPERARIO /
MANUALE DELL’OPERATORE / MANUEL OPÉRATEUR / MANUAL DE UTILIZAÇÃO /
GEBRUIKSAANWIJZING / РУКОВОДСТВО ОПЕРАТОРА / KÄYTTÖOPAS /
ANVÄNDARHANDBOK / BRUKERVEILEDNING / BRUGSVEJLEDNING / INSTRUKCJA
UŻYTKOWNIKA / NÁVOD K OBSLUZE / NÁVOD NA OBSLUHU / Uporabniški priročnik /
PRIRUČNIK ZA RUKOVANJE / HASZNÁLATI ÚTMUTATÓ / MANUAL DE UTILIZARE /
/ KULLANIM
KILAVUZU /
KASUTUSJUHEND
Original Instructions / Übersetzung der Originalanweisungen / Traducción de las instrucciones originales / Traduzione delle istruzioni originali / Traduction des
instructions d'origine / Traduzido a partir das instruções originais / Vertaling van de originele gebruiksaanwijzing / Перевод оригинальных инструкций /
Alkuperäisten ohjeiden käännös / Översättning av originalinstruktionerna / Produsentens instruksjoner / Oversættelse af de originale vejledninger / Tłumaczenie
oryginalnej instrukcji / Překlad originálního návodu / Preklad originálneho návodu / Prevod originalnih navodil / Prijevod izvornih uputa / Az eredeti utasítás
fordítása / Traducere a instrucțiunilor originale / Превод на оригиналните инструкции / Αυθεντικές οδηγίες / / Orijinal
Talimatların Tercümesi / / Originalių instrukcijų vertimas / Instrukciju tulkojums no oriģinālvalodas / Originaalkasutusjuhendi tõlge

Table of Contents

Questions and Answers

  • P
    Pedro RobertsAug 2, 2025
    How to fix GreenWorks Trimmer line that won't advance?
    • A
      Annette MeltonAug 2, 2025
      If the line on your GreenWorks Trimmer isn't advancing, it could be due to several reasons. The lines might be welded together; try lubricating them with silicone spray. There might not be enough line on the spool, so install more line. The lines could be worn too short, in which case you should advance the cutting line. Alternatively, the lines might be tangled on the spool; remove them and rewind them properly.
  • K
    kristy47Aug 5, 2025
    Why GreenWorks Trimmer won't start when I push the trigger?
    • K
      Katherine MyersAug 6, 2025
      Your GreenWorks Trimmer might not start due to a few reasons: there may be no electrical contact between the machine and the battery pack. To solve this, remove the battery pack, check the contact, and reinstall it. Alternatively, the battery pack could be depleted, so try charging it. Also, ensure you're pulling the lock-out button and the trigger simultaneously to start the machine.
  • E
    Emily CamposAug 15, 2025
    Why does the line keep breaking on my GreenWorks STG310 Trimmer?
    • I
      Isaac McbrideAug 15, 2025
      If the line on your GreenWorks Trimmer keeps breaking, it's likely due to incorrect usage. Ensure you're cutting with the tip of the line, avoiding stones, walls, and other hard objects. Also, advance the cutting line regularly to maintain a full cutting width.
  • J
    Jennifer RiveraAug 19, 2025
    What causes grass to wind around the GreenWorks STG310 head?
    • K
      kristin18Aug 19, 2025
      Grass winding around the trimmer head and motor housing of your GreenWorks Trimmer typically happens when cutting tall grass at ground level. To prevent this, cut tall grass from the top down, removing no more than 8" in each pass.
  • C
    Catherine ThomasAug 23, 2025
    Why does my GreenWorks STG310 vibrate so much?
    • A
      Alan BrooksAug 23, 2025
      Increased vibration in your GreenWorks Trimmer is often because the line is worn down on one side and hasn't been advanced in time. Ensure the line on both sides is normal and advance the line.
  • D
    Dawn ShawAug 27, 2025
    What to do if GreenWorks Trimmer line doesn't cut well?
    • A
      Allison FrankAug 27, 2025
      If the line on your GreenWorks Trimmer isn't cutting well, the cut-off blade may have become dull. Sharpen the cut-off blade with a file or replace it.
  • L
    Lisa TaylorNov 9, 2025
    What to do if my GreenWorks STG310 Trimmer stops when cutting?
    • J
      jane24Nov 9, 2025
      If your GreenWorks Trimmer stops while cutting, there are several potential causes. First, ensure the guard is properly attached to the machine; if not, remove the battery pack and attach the guard. Second, check that you are using the correct cutting line, specifically a nylon cutting line of 0.065" (1.65 mm) diameter. Third, grass may be wound around the motor shaft or trimmer head; if so, stop the machine, remove the battery pack, and clear away the grass. Fourth, the motor might be overloaded; remove the trimmer head from the grass, and it should recover, also when cutting, move the trimmer head in and out of the grass, removing no more than 8" in a single pass. Fifth, the battery pack or machine may be too hot; cool them down. Sixth, the battery pack may be disconnected; reinstall it....

Summary

Description

Purpose

Explains the intended use of the grass trimmer for cutting grass and weeds.

Overview

Provides a diagram and list of all machine parts for identification.

General Power Tool Safety Warnings

Installation

Unpack the Machine

Instructions for safely unpacking the grass trimmer and its components.

Attach the Guard

Steps to securely attach the protective guard to the trimmer head.

Assemble the Shaft

Guide on how to assemble the machine's shaft sections correctly.

Attach the Auxiliary Handle

Steps for attaching the auxiliary handle for improved control and comfort.

Install the Battery Pack

Instructions for correctly inserting the battery pack into the machine.

Remove the Battery Pack

Procedure for safely removing the battery pack from the machine.

Operation

Start the Machine

Detailed steps on how to safely start the grass trimmer.

Stop the Machine

Instructions on how to safely stop the grass trimmer operation.

Operation Tips

Provides useful tips for efficient and safe operation of the trimmer.

Cutting Tips

Advice on the best techniques for cutting grass effectively.

Adjust the Length of the Cutting Line

Guide on how to adjust the length of the trimmer line for optimal performance.

Line Cut-off Blade

Explanation of the function and use of the line cut-off blade.

Maintenance

General Information

General advice and important notes regarding machine maintenance.

Clean the Machine

Instructions and precautions for cleaning the grass trimmer.

Replace the Spool

Step-by-step guide for replacing the trimmer line spool.

Replace the Cutting Line

Procedure for replacing the cutting line on the trimmer.

Transportation and Storage

Move the Machine

Instructions on how to safely move the trimmer during transport.

Store the Machine

Guidelines and precautions for storing the grass trimmer.

Troubleshooting

Technical Data

Warranty

EC Declaration of Conformity

GreenWorks STG310 Specifications

General IconGeneral
TypeString Trimmer
Power SourceBattery
Battery IncludedYes
Charger IncludedYes
Cutting Width12 inches
Line Diameter0.065 inches

Related product manuals