EasyManua.ls Logo

GreenWorks STG404 - User Manual

GreenWorks STG404
188 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
STG404
GD60LT
OPERATOR MANUAL / BEDIENUNGSHANDBUCH / MANUAL DEL OPERARIO /
MANUALE DELL’OPERATORE / MANUEL OPÉRATEUR / MANUAL DE UTILIZAÇÃO /
GEBRUIKSAANWIJZING / РУКОВОДСТВО ОПЕРАТОРА / KÄYTTÖOPAS /
ANVÄNDARHANDBOK / BRUKERVEILEDNING / BRUGSVEJLEDNING / INSTRUKCJA
UŻYTKOWNIKA / NÁVOD K OBSLUZE / NÁVOD NA OBSLUHU / Uporabniški priročnik /
PRIRUČNIK ZA RUKOVANJE / HASZNÁLATI ÚTMUTATÓ / MANUAL DE UTILIZARE /
/ KULLANIM
KILAVUZU /
KASUTUSJUHEND
Original Instructions / Übersetzung der Originalanweisungen / Traducción de las instrucciones originales / Traduzione delle istruzioni originali / Traduction des
instructions d'origine / Traduzido a partir das instruções originais / Vertaling van de originele gebruiksaanwijzing / Перевод оригинальных инструкций /
Alkuperäisten ohjeiden käännös / Översättning av originalinstruktionerna / Produsentens instruksjoner / Oversættelse af de originale vejledninger / Tłumaczenie
oryginalnej instrukcji / Překlad originálního návodu / Preklad originálneho návodu / Prevod originalnih navodil / Prijevod izvornih uputa / Az eredeti utasítás
fordítása / Traducere a instrucțiunilor originale / Превод на оригиналните инструкции / Αυθεντικές οδηγίες / / Orijinal
Talimatların Tercümesi / / Originalių instrukcijų vertimas / Instrukciju tulkojums no oriģinālvalodas / Originaalkasutusjuhendi tõlge

Table of Contents

Other manuals for GreenWorks STG404

Preview: Original Instructions
Original Instructions189 pages

Questions and Answers

  • J
    John LambAug 21, 2025
    Why doesn't my GreenWorks STG404 Trimmer start when I push the trigger?
    • S
      Sarah WallaceAug 21, 2025
      If your GreenWorks Trimmer doesn't start when you push the trigger, here's what to check: * Make sure there's good electrical contact between the trimmer and the battery. Remove the battery, inspect the contact points, and then reinstall the battery securely. * The battery pack might be empty. Try charging it. * Ensure you're pressing the lock-out button and the trigger simultaneously. First, pull and hold the lock-out button, then pull the trigger to start the trimmer.
  • R
    Rebecca WellsAug 26, 2025
    How to fix a GreenWorks STG404 Trimmer when the line does not advance?
    • J
      Jaime GrossAug 26, 2025
      Here's how to address a GreenWorks Trimmer line that won't advance: * If the lines are stuck together, try lubricating them with silicone spray. * If there's not enough line on the spool, install more line. * If the lines are worn too short, advance the cutting line. * If the lines are tangled on the spool: 1. Remove the lines from the spool. 2. Rewind the lines neatly.
  • P
    phamjohnAug 28, 2025
    Why does the line keep breaking on my GreenWorks Trimmer?
    • D
      Daniel WhiteAug 28, 2025
      If the line on your GreenWorks Trimmer keeps breaking, it might be due to incorrect usage. Try these tips: * Cut with the tip of the line, and avoid hitting stones, walls, or other hard objects. * Advance the cutting line regularly to maintain a full cutting width.
  • D
    Dr. Mark StewartAug 30, 2025
    How to stop grass from winding around the trimmer head of my GreenWorks STG404?
    • J
      Jesse WilliamsAug 30, 2025
      To prevent grass from winding around the trimmer head and motor housing of your GreenWorks Trimmer, avoid cutting tall grass at ground level. Instead, cut tall grass from the top down, removing no more than 8 inches in each pass.
  • T
    Tara AlvaradoSep 1, 2025
    What to do if my GreenWorks STG404 line does not cut well?
    • B
      bhallSep 1, 2025
      If the line on your GreenWorks Trimmer isn't cutting well, the cut-off blade may be dull. Sharpen the cut-off blade with a file or replace it.
  • C
    Charles GreenSep 3, 2025
    Why is the vibration on my GreenWorks STG404 Trimmer increasing?
    • T
      Taylor ObrienSep 3, 2025
      If the vibration of your GreenWorks Trimmer increases noticeably, it could be because the line is worn down on one side and hasn't been advanced. Ensure the line on both sides is normal and advance the line.
  • J
    Jeffrey HendricksSep 5, 2025
    Why GreenWorks Trimmer does not start?
    • T
      Tiffany DavisSep 6, 2025
      If your GreenWorks Trimmer doesn't start when you push the trigger, there could be a few reasons. First, check that the battery pack is making good electrical contact with the trimmer by removing and reinstalling it. Also, make sure the battery isn't depleted – if it is, charge it. Finally, ensure you're pressing the lock-out button and trigger simultaneously to start the trimmer.
  • W
    Wendy MooreSep 8, 2025
    What to do if GreenWorks STG404 Trimmer stops when cutting?
    • L
      Laura RamseySep 8, 2025
      If your GreenWorks Trimmer stops while you're cutting, it could be due to a couple of things. First, make sure the guard is properly attached to the machine; remove the battery pack before attaching the guard. Also, ensure you are using the correct cutting line diameter (2.0 mm/2.4 mm).
  • H
    holdenjenniferSep 10, 2025
    What to do if GreenWorks STG404 battery pack is disconnected?
    • J
      Jacob TuckerSep 10, 2025
      If the battery pack is disconnected from the GreenWorks Trimmer, reinstall the battery pack again.
  • D
    Deborah HurstSep 10, 2025
    How to fix GreenWorks Trimmer line that does not extend?
    • J
      Jason KennedySep 12, 2025
      If the line on your GreenWorks Trimmer isn't extending, several factors could be at play. The lines might be stuck together; try lubricating them with silicone spray. You might not have enough line on the spool, so try installing more. The lines could be worn and too short, in which case, extend the line. Or, the lines might be tangled on the spool; remove them and wind them again.

GreenWorks STG404 Specifications

General IconGeneral
TypeString Trimmer
Battery Voltage40V
Cutting Width13 inches
RuntimeUp to 60 minutes
Power SourceBattery
Battery IncludedYes
Charger IncludedYes
Cutting Path13 inches
Line Diameter0.065 in

Related product manuals